Most smartphones have come with the feature of water and dust resistance as a basic standard, where the quality of a smartphone’s resistance to water and dust is measured using the Ingress Protection standard, or what is known as the (IP) symbol, and the higher the number that accompanies it, such as: IP67 or IP68, this means that Your phone has high protection against water and dust.

But if the smartphone has a lower rating than the two previous evaluations, or it does not get any rating at all, then you should prepare for the worst in case it was exposed to water or dust in any way, so instead of trying to save the phone when it fell in the water by traditional methods, such as : Shake it vigorously to try to get the water droplets stuck inside. Here are some ways to save your phone after falling into water :

1. Once you drop the phone in the water, take it out at full speed, the longer it is in the water, the more likely it will be damaged, then turn it off immediately, and do not try to press any of the other buttons or download any applications, just turn it off.
2. Remove the battery quickly if the phone has a removable battery, in order to cut off the power supply to the device as soon as possible to prevent the possibility of a short circuit, as we find that some smartphones, such as: Nokia 1.3 allow you to remove the battery, while most modern smartphones It comes with a non-removable battery and basically it may have the feature of water and dust resistance at a high rating.
3. The heat can damage the microelectronic components inside. Alternatively, wipe the phone quickly with a dry cotton cloth, making sure that no water enters the charging port, SIM card slots, MicroSD, or headphone jack.
4. Do not try to use the phone immediately after wiping the water on it or if you find the water droplets have disappeared, instead leave it to dry completely, as you can wrap the phone in a dry cloth and place it in a bag with rice and then close it for 12 to 24 hours, as the rice helps absorb moisture Wonderfully.
5. If you find that your phone is still wet even after using the previous steps or that the phone is not working well, it may be better for you to turn to a service center for help, as some retail stores offer dedicated services to repair smartphones that have fallen into water through Use tools specially designed to draw water out of them.

Sometimes it is a good idea to be prepared for these situations, and the best way to do this is to keep the packaging containing the white granules that you find in new bags, new shoes, or electrical tools – known as silica, as they help absorb moisture quickly and efficiently. .

You can also buy bags for this, such as: Nine Lives Wet Phone Fix, or Nanoflow X which is a ready-made solution that you can keep at home, all you have to do is put the phone that fell into the water inside this bag and close it tightly, then wait for a period of The time ranges from 12 to 24 hours to allow your phone to dry.